[bootlin/training-materials updates] master: Add BBB flash boot log (8979dc12)

Michael Opdenacker michael.opdenacker at bootlin.com
Thu Nov 19 12:38:03 CET 2020


Repository : https://github.com/bootlin/training-materials
On branch  : master
Link       : https://github.com/bootlin/training-materials/commit/8979dc1261f934a7f5ca28c05adcd19b516579b5

>---------------------------------------------------------------

commit 8979dc1261f934a7f5ca28c05adcd19b516579b5
Author: Michael Opdenacker <michael.opdenacker at bootlin.com>
Date:   Thu Nov 19 12:37:29 2020 +0100

    Add BBB flash boot log
    
    - Hoping to help with flashing issues
    
    Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>


>---------------------------------------------------------------

8979dc1261f934a7f5ca28c05adcd19b516579b5
 .../common/bootloader/beaglebone-black/README.txt  |   3 +
 .../common/bootloader/beaglebone-black/boot.log    | 179 +++++++++++++++++++++
 2 files changed, 182 insertions(+)

diff --git a/lab-data/common/bootloader/beaglebone-black/README.txt b/lab-data/common/bootloader/beaglebone-black/README.txt
index 96bdaced..3a977f51 100644
--- a/lab-data/common/bootloader/beaglebone-black/README.txt
+++ b/lab-data/common/bootloader/beaglebone-black/README.txt
@@ -90,6 +90,9 @@ If after 1 minute, you got nothing special on the 4 LEDs, this probably
 means that you didn't manage to boot your board from the external micro-SD
 card. This happens as the button to press is tiny. Try again!
 
+See the 'boot.log' file in this directory for the exact messages
+your should get in the serial console (if you connected it).
+
 If the LEDs all blink at the same time, this means that the reflashing
 operation actually started but failed. If this happens, you will have
 to connect your PC to the serial line of your board, and do this again.
diff --git a/lab-data/common/bootloader/beaglebone-black/boot.log b/lab-data/common/bootloader/beaglebone-black/boot.log
new file mode 100644
index 00000000..dd27aa50
--- /dev/null
+++ b/lab-data/common/bootloader/beaglebone-black/boot.log
@@ -0,0 +1,179 @@
+U-Boot SPL 2018.05 (Nov 22 2018 - 23:13:05 +0100)
+Trying to boot from MMC1
+
+
+U-Boot 2018.05 (Nov 22 2018 - 23:13:05 +0100)
+
+CPU  : AM335X-GP rev 2.1
+I2C:   ready
+DRAM:  512 MiB
+No match for driver 'omap_hsmmc'
+No match for driver 'omap_hsmmc'
+Some drivers were not found
+MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1
+<ethaddr> not set. Validating first E-fuse MAC
+Net:   cpsw, usb_ether
+Press SPACE to abort autoboot in 2 seconds
+3359648 bytes read in 214 ms (15 MiB/s)
+35947 bytes read in 8 ms (4.3 MiB/s)
+## Flattened Device Tree blob at 82000000
+   Booting using the fdt blob at 0x82000000
+   Loading Device Tree to 8fff4000, end 8ffffc6a ... OK
+
+Starting kernel ...
+
+[    0.000000] Booting Linux on physical CPU 0x0
+[    0.000000] Linux version 4.17.0 (mike at mike-laptop) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-27ubuntu1~18.04)) #1 SMP Thu Nov 22 22:18:28 CET 2018
+[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
+[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
+[    0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black Wireless
+[    0.000000] Memory policy: Data cache writeback
+[    0.000000] cma: Reserved 16 MiB at 0x9f000000
+[    0.000000] CPU: All CPU(s) started in SVC mode.
+[    0.000000] AM335X ES2.1 (sgx neon)
+[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x498 with crng_init=0
+[    0.000000] percpu: Embedded 15 pages/cpu @(ptrval) s39248 r0 d22192 u61440
+[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
+[    0.000000] Kernel command line: console=ttyO0,115200n8
+[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
+[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
+[    0.000000] Memory: 485660K/524288K available (5120K kernel code, 353K rwdata, 1416K rodata, 2048K init, 7395K bss, 22244K reserved, 16384K cma-reserved, 0K highmem)
+[    0.000000] Virtual kernel memory layout:
+[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
+[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
+[    0.000000]     vmalloc : 0xe0800000 - 0xff800000   ( 496 MB)
+[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
+[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
+[    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (6112 kB)
+[    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
+[    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 354 kB)
+[    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   (7396 kB)
+[    0.000000] Running RCU self tests
+[    0.000000] Hierarchical RCU implementation.
+[    0.000000] 	RCU event tracing is enabled.
+[    0.000000] 	RCU lockdep checking is enabled.
+[    0.000000] 	RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
+[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
+[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
+[    0.000000] IRQ: Found an INTC at 0x(ptrval) (revision 5.0) with 128 interrupts
+[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
+[    0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
+[    0.000050] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
+[    0.000109] OMAP clocksource: timer1 at 24000000 Hz
+[    0.000458] timer_probe: no matching timers found
+[    0.001395] Console: colour dummy device 80x30
+[    0.001457] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
+[    0.001474] This ensures that you still see kernel messages. Please
+[    0.001490] update your kernel commandline.
+[    0.001506] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
+[    0.001521] ... MAX_LOCKDEP_SUBCLASSES:  8
+[    0.001535] ... MAX_LOCK_DEPTH:          48
+[    0.001550] ... MAX_LOCKDEP_KEYS:        8191
+[    0.001564] ... CLASSHASH_SIZE:          4096
+[    0.001578] ... MAX_LOCKDEP_ENTRIES:     32768
+[    0.001593] ... MAX_LOCKDEP_CHAINS:      65536
+[    0.001607] ... CHAINHASH_SIZE:          32768
+[    0.001623]  memory used by lock dependency info: 4655 kB
+[    0.001637]  per task-struct memory footprint: 1536 bytes
+[    0.001675] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
+[    0.078573] pid_max: default: 32768 minimum: 301
+[    0.078987] Security Framework initialized
+[    0.079158] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.079183] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
+[    0.082781] CPU: Testing write buffer coherency: ok
+[    0.084412] CPU0: thread -1, cpu 0, socket -1, mpidr 0
+[    0.086469] Setting up static identity map for 0x80100000 - 0x80100078
+[    0.087077] Hierarchical SRCU implementation.
+[    0.089038] smp: Bringing up secondary CPUs ...
+[    0.089068] smp: Brought up 1 node, 1 CPU
+[    0.089087] SMP: Total of 1 processors activated (996.14 BogoMIPS).
+[    0.089104] CPU: All CPU(s) started in SVC mode.
+[    0.092553] devtmpfs: initialized
+[    0.119074] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
+[    0.119922] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
+[    0.119995] futex hash table entries: 256 (order: 2, 16384 bytes)
+[    0.121664] pinctrl core: initialized pinctrl subsystem
+[    0.131824] DMA: preallocated 256 KiB pool for atomic coherent allocations
+[    0.185033] l4_wkup_cm:clk:0010:0: failed to disable
+[    0.240528] cpuidle: using governor menu
+[    0.253440] OMAP GPIO hardware version 0.1
+[    0.259254] GPIO line 106 (LS_BUF_EN) hogged as output/high
+[    0.276283] No ATAGs?
+[    0.276310] hw-breakpoint: debug architecture 0x4 unsupported.
+[    0.290954] cryptd: max_cpu_qlen set to 1000
+[    0.306912] edma 49000000.edma: TI EDMA DMA engine driver
+[    0.313890] SCSI subsystem initialized
+[    0.314506] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_i2c0_pins, deferring probe
+[    0.314624] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup at 44c00000/scm at 210000/pinmux at 800/pinmux_i2c2_pins, deferring probe
+[    0.315027] pps_core: LinuxPPS API ver. 1 registered
+[    0.315048] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
+[    0.316252] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
+[    0.318119] clocksource: Switched to clocksource timer1
+[    0.524111] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
+[    0.535112] workingset: timestamp_bits=14 max_order=17 bucket_order=3
+[    0.552130] io scheduler noop registered
+[    0.552171] io scheduler deadline registered
+[    0.552364] io scheduler cfq registered (default)
+[    0.552389] io scheduler mq-deadline registered
+[    0.552409] io scheduler kyber registered
+[    0.555061] pinctrl-single 44e10800.pinmux: 142 pins, size 568
+[    0.562544] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
+[    0.565039] Serial: 8250/16550 driver, 6 ports, IRQ sharing enabled
+[    0.578419] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 30, base_baud = 3000000) is a 8250
+[    1.159515] console [ttyS0] enabled
+[    1.166264] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 31, base_baud = 3000000) is a 8250
+[    1.175681] serial serial0: tty port ttyS3 registered
+[    1.184704] omap_rng 48310000.rng: Random Number Generator ver. 20
+[    1.195250] Error: Driver 'tfp410' is already registered, aborting...
+[    1.206092] mousedev: PS/2 mouse device common for all mice
+[    1.215150] i2c /dev entries driver
+[    1.221339] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
+[    1.232124] sdhci: Secure Digital Host Controller Interface driver
+[    1.238540] sdhci: Copyright(c) Pierre Ossman
+[    1.244082] omap_hsmmc 48060000.mmc: Got CD GPIO
+[    1.315791] mmc0: host does not support reading read-only switch, assuming write-enable
+[    1.326209] mmc0: new high speed SDHC card at address 1234
+[    1.335321] mmcblk0: mmc0:1234 SA08G 7.21 GiB 
+[    1.347178]  mmcblk0: p1
+[    1.387889] mmc1: new high speed MMC card at address 0001
+[    1.396017] mmcblk1: mmc1:0001 MMC04G 3.60 GiB 
+[    1.402194] mmcblk1boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
+[    1.409682] mmcblk1boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
+[    1.416829] mmcblk1rpmb: mmc1:0001 MMC04G partition 3 128 KiB, chardev (249:0)
+[    1.426530]  mmcblk1: p1 p2
+[    1.443211] sdhci-pltfm: SDHCI platform and OF driver helper
+[    1.452676] ledtrig-cpu: registered to indicate activity on CPUs
+[    1.461990] remoteproc remoteproc0: wkup_m3 is available
+[    1.470867] oprofile: using arm/armv7
+[    1.474636] omap_voltage_late_init: Voltage driver support not added
+[    1.482088] ThumbEE CPU extension supported.
+[    1.486428] Registering SWP/SWPB emulation handler
+[    1.508342] random: fast init done
+[    1.604578] input: tps65217_pwrbutton as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
+[    1.618609] tps65217 0-0024: TPS65217 ID 0xe version 1.2
+[    1.626519] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
+[    1.782814] tda998x 0-0070: found TDA19988
+[    1.789694] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
+[    1.795781] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
+[    1.802578] [drm] No driver support for vblank timestamp query.
+[    1.810751] [drm] Cannot find any crtc or sizes
+[    1.819624] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0
+[    1.827543] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
+[    1.949418] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
+[    1.958682] remoteproc remoteproc0: powering up wkup_m3
+[    1.966838] remoteproc remoteproc0: Direct firmware load for am335x-pm-firmware.elf failed with error -2
+[    1.976799] remoteproc remoteproc0: request_firmware failed: -2
+[    1.982892] wkup_m3_ipc 44e11324.wkup_m3_ipc: rproc_boot failed
+[    1.996863] wlan-en-regulator: disabling
+[    2.007767] Freeing unused kernel memory: 2048K
+[    2.893018] [drm] Cannot find any crtc or sizes
+[    7.113266] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
+1+0 records in
+1+0 records out
+dd: writing '/dev/mmcblk1boot1': No space left on device
+4097+0 records in
+4096+0 records out
+eMMC flashing successful
+
+Please press Enter to activate this console. 
+




More information about the training-materials-updates mailing list