[bootlin/training-materials updates] master: Flashing BBB: include the BBBW in the explanation (f4b2d2a0)
Miquel Raynal
miquel.raynal at bootlin.com
Wed Mar 10 19:43:46 CET 2021
Repository : https://github.com/bootlin/training-materials
On branch : master
Link : https://github.com/bootlin/training-materials/commit/f4b2d2a035a7404e151970e720b6382955988353
>---------------------------------------------------------------
commit f4b2d2a035a7404e151970e720b6382955988353
Author: Miquel Raynal <miquel.raynal at bootlin.com>
Date: Wed Mar 10 19:41:30 2021 +0100
Flashing BBB: include the BBBW in the explanation
Signed-off-by: Miquel Raynal <miquel.raynal at bootlin.com>
>---------------------------------------------------------------
f4b2d2a035a7404e151970e720b6382955988353
lab-data/common/bootloader/beaglebone-black/README.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/lab-data/common/bootloader/beaglebone-black/README.txt b/lab-data/common/bootloader/beaglebone-black/README.txt
index b75bbfce..27bcf205 100644
--- a/lab-data/common/bootloader/beaglebone-black/README.txt
+++ b/lab-data/common/bootloader/beaglebone-black/README.txt
@@ -74,8 +74,10 @@ Then, press and hold the 'Boot Switch' button (the only one close to the
micro-SD slot), power up the board (either through the power or USB device
connectors), and release the button.
-After about 10 to 20 seconds, you should see the 4 LEDs next to the Ethernet
-connector turned on. This confirms that reflashing went well. You are done!
+After about 10 to 20 seconds, you should see the 4 LEDs turned on next to:
+- the Ethernet connector on BeagleBoneBlack
+- the micro-USB connector on BeagleBoneBlack wireless
+This confirms that reflashing went well. You are done!
Then, remove the micro-SD card.
More information about the training-materials-updates
mailing list