[bootlin/training-materials updates] master: slides/yocto-shopping-list: improve formatting, drop short links (72042c20)
Thomas Petazzoni
thomas.petazzoni at bootlin.com
Mon Mar 15 16:13:08 CET 2021
Repository : https://github.com/bootlin/training-materials
On branch : master
Link : https://github.com/bootlin/training-materials/commit/72042c20ee5951830d8108e7d26f664d112fd6a5
>---------------------------------------------------------------
commit 72042c20ee5951830d8108e7d26f664d112fd6a5
Author: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
Date: Mon Mar 15 16:13:08 2021 +0100
slides/yocto-shopping-list: improve formatting, drop short links
Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
>---------------------------------------------------------------
72042c20ee5951830d8108e7d26f664d112fd6a5
slides/yocto-shopping-list/yocto-shopping-list.tex | 114 +++++++++++++--------
1 file changed, 72 insertions(+), 42 deletions(-)
diff --git a/slides/yocto-shopping-list/yocto-shopping-list.tex b/slides/yocto-shopping-list/yocto-shopping-list.tex
index e68efa61..5544a720 100644
--- a/slides/yocto-shopping-list/yocto-shopping-list.tex
+++ b/slides/yocto-shopping-list/yocto-shopping-list.tex
@@ -1,55 +1,85 @@
-\begin{frame}
-\frametitle{Two supported hardware platforms}
- There are two variants of the practical labs for this course, one
- supporting the Beaglebone Black board, the other supporting the
- STMicroelectronics STM32MP157A-DK1 Discovery board.
- \vfill
+\begin{frame}{Two supported hardware platforms}
+ Two variants for this course, each using a different hardware
+ platform. \vfill
\begin{columns}
\column{0.5\textwidth}
- \includegraphics[height=0.5\textheight]{slides/beagleboneblack-board/beagleboneblack.png}
- \newline
- Beaglebone Black
- \newline {\scriptsize \url{https://bootlin.com/doc/training/yocto/}}
+ \begin{center}
+ \includegraphics[height=0.4\textheight]{slides/beagleboneblack-board/beagleboneblack.png}
+ \newline
+ Beaglebone Black
+ \newline {\scriptsize \url{https://bootlin.com/doc/training/yocto/}}
+ \end{center}
\column{0.5\textwidth}
- \includegraphics[height=0.5\textheight]{slides/discovery-board-dk1/discovery-board-dk1.png}
- \newline
- STM32MP157A-DK1 Discovery
- \newline {\scriptsize \url{https://bootlin.com/doc/training/yocto-stm32/}}
+ \begin{center}
+ \includegraphics[height=0.4\textheight]{slides/discovery-board-dk1/discovery-board-dk1.png}
+ \newline
+ STM32MP157A-DK1 Discovery
+ \newline {\scriptsize \url{https://bootlin.com/doc/training/yocto-stm32/}}
+ \end{center}
\end{columns}
\end{frame}
-\begin{frame}
-\frametitle{Shopping list: hardware for this course}
+\begin{frame}[fragile]{Shopping list: BeagleBone Black Wireless variant}
\begin{columns}
\column{0.75\textwidth}
- \footnotesize
\begin{itemize}
- \item Main board, choice 1:
- \begin{itemize}
- \item STMicroelectronics STM32MP157A-DK1 Discovery kit
- (Mouser: 65 EUR + VAT)
- \item USB-C cable (power supply)
- \item USB-A to micro B cable (serial console)
- \end{itemize}
- \item Main board, choice 2:
- \begin{itemize}
- \item Beaglebone Black or Beaglebone Black Wireless
- (Mouser: 73 EUR + VAT), USB-A to micro B power cable included
- \item USB Serial Cable - 3.3 V - female ends: \\
- Olimex: \url{https://frama.link/zWJDToXP}
- \end{itemize}
- \item Nintendo Nunchuk with UEXT connector: \\
- Olimex: \url{https://j.mp/1dTYLfs}
- \item Breadboard jumper wires - Male ends: \\
- Olimex: \url{https://bit.ly/2pSiIPs}
- \item SD card with 8 GB capacity
+ \item Beaglebone Black or Beaglebone Black Wireless, USB-A to
+ micro B power cable included
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.mouser.fr/ProductDetail/BeagleBoard-by-GHI/BBBWL-SC-562?qs=k%2Fsw%252B3Yi%2FUbELBjXQpiBUQ%3D%3D}
+ }
+ \item USB Serial Cable - 3.3 V - female ends
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.olimex.com/Products/Components/Cables/USB-Serial-Cable/USB-SERIAL-F/}
+ }
+ \item Nintendo Nunchuk with UEXT connector
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.olimex.com/Products/Modules/Sensors/MOD-WII/MOD-Wii-UEXT-NUNCHUCK/}
+ }
+ \item Breadboard jumper wires - Male ends
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.olimex.com/Products/Breadboarding/JUMPER-WIRES/JW-110x10/}
+ }
+ \item SD card with 8 GB capacity
\end{itemize}
\column{0.25\textwidth}
- \includegraphics[height=0.25\textheight]{slides/yocto-shopping-list/nunchuk.jpg} \\
- \vspace{1cm}
- \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/jumper-wires.jpg} \\
- \vspace{1cm}
- %% Source: https://commons.wikimedia.org/wiki/File:SD_card_icon.svg
- \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/sd-card.pdf}
+ \begin{center}
+ \includegraphics[height=0.2\textheight]{slides/beagleboneblack-board/beagleboneblack.png} \\
+ \includegraphics[height=0.2\textheight]{slides/yocto-shopping-list/nunchuk.jpg} \\
+ \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/jumper-wires.jpg} \\
+ %% Source: https://commons.wikimedia.org/wiki/File:SD_card_icon.svg
+ \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/sd-card.pdf}
+ \end{center}
+ \end{columns}
+\end{frame}
+
+\begin{frame}[fragile]{Shopping list: STM32MP1 Discovery Kit variant}
+ \begin{columns}
+ \column{0.75\textwidth}
+ \begin{itemize}
+ \item STMicroelectronics STM32MP157A-DK1 Discovery kit
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.mouser.fr/ProductDetail/STMicroelectronics/STM32MP157A-DK1?qs=9r4v7xj2LnkgRwGGD4%252BIjQ%3D%3D}
+ }
+ \item USB-C cable for the power supply
+ \item USB-A to micro B cable for the serial console
+ \item Nintendo Nunchuk with UEXT connector
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.olimex.com/Products/Modules/Sensors/MOD-WII/MOD-Wii-UEXT-NUNCHUCK/}
+ }
+ \item Breadboard jumper wires - Male ends
+ {\fontsize{6}{6}\selectfont
+ \url{https://www.olimex.com/Products/Breadboarding/JUMPER-WIRES/JW-110x10/}
+ }
+ \item SD card with 8 GB capacity
+ \end{itemize}
+ \column{0.25\textwidth}
+ \begin{center}
+ \includegraphics[height=0.2\textheight]{slides/discovery-board-dk1/discovery-board-dk1.png}\\
+ \includegraphics[height=0.2\textheight]{slides/yocto-shopping-list/nunchuk.jpg} \\
+ \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/jumper-wires.jpg} \\
+ %% Source: https://commons.wikimedia.org/wiki/File:SD_card_icon.svg
+ \includegraphics[height=0.15\textheight]{slides/yocto-shopping-list/sd-card.pdf}
+ \end{center}
\end{columns}
\end{frame}
More information about the training-materials-updates
mailing list