[bootlin/training-materials updates] master: U-Boot slides: show SPL in console output (b3971d1b)
Michael Opdenacker
michael.opdenacker at bootlin.com
Fri Apr 8 12:23:13 CEST 2022
Repository : https://github.com/bootlin/training-materials
On branch : master
Link : https://github.com/bootlin/training-materials/commit/b3971d1b7ffd6f994e4d1dbcf42d376b4e605195
>---------------------------------------------------------------
commit b3971d1b7ffd6f994e4d1dbcf42d376b4e605195
Author: Michael Opdenacker <michael.opdenacker at bootlin.com>
Date: Fri Apr 8 12:23:13 2022 +0200
U-Boot slides: show SPL in console output
Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>
>---------------------------------------------------------------
b3971d1b7ffd6f994e4d1dbcf42d376b4e605195
.../sysdev-bootloaders-u-boot.tex | 44 +++++++++++-----------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex b/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
index 8bbf1505..768ef203 100644
--- a/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
+++ b/slides/sysdev-bootloaders-u-boot/sysdev-bootloaders-u-boot.tex
@@ -130,38 +130,38 @@ CONFIG_USB_EHCI_HCD=y
\begin{frame}[fragile]
\frametitle{U-boot prompt}
+ \begin{columns}
+ \column{0.5\textwidth}
\begin{itemize}
\item Connect the target to the host through a serial console.
- \item Power-up the board. On the serial console, you will see
- something like:
+ \item Power-up the board. On the serial console, you should
+ see U-Boot starting up.
+ \item The U-Boot shell offers a set of commands. We will study the
+ most important ones, see the documentation for a complete
+ reference or the \code{help} command.
\end{itemize}
+ \column{0.5\textwidth}
\tiny
\begin{verbatim}
-U-Boot 2020.04 (May 26 2020 - 16:05:43 +0200)
+U-Boot SPL 2022.01 (Mar 31 2022 - 14:58:17 +0200)
+Trying to boot from MMC1
-CPU: SAMA5D36
-Crystal frequency: 12 MHz
-CPU clock : 528 MHz
-Master clock : 132 MHz
-DRAM: 256 MiB
-NAND: 256 MiB
-MMC: Atmel mci: 0, Atmel mci: 1
-Loading Environment from NAND... OK
-In: serial at ffffee00
-Out: serial at ffffee00
-Err: serial at ffffee00
-Net: eth0: ethernet at f0028000
-Error: ethernet at f802c000 address not set.
+U-Boot 2022.01 (Mar 31 2022 - 14:58:17 +0200)
+
+CPU : AM335X-GP rev 2.1
+Model: TI AM335x BeagleBone Black
+DRAM: 512 MiB
+WDT: Started wdt at 44e35000 with servicing (60s timeout)
+NAND: 0 MiB
+MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
+Loading Environment from FAT... OK
+Net: Could not get PHY for ethernet at 4a100000: addr 0
+eth2: ethernet at 4a100000, eth3: usb_ether [PRIME]
Hit any key to stop autoboot: 0
=>
\end{verbatim}
-\normalsize
- \begin{itemize}
- \item The U-Boot shell offers a set of commands. We will study the
- most important ones, see the documentation for a complete
- reference or the \code{help} command.
- \end{itemize}
+ \end{columns}
\end{frame}
\begin{frame}[fragile]
More information about the training-materials-updates
mailing list