[bootlin/training-materials updates] master: sysdev-kernel-cross-compiling-stm32mp1.tex: don't use ext2load (3262837c)
Michael Opdenacker
michael.opdenacker at bootlin.com
Fri Oct 14 10:02:13 CEST 2022
Repository : https://github.com/bootlin/training-materials
On branch : master
Link : https://github.com/bootlin/training-materials/commit/3262837c2d7acf5ff870a2d3463a5e08bb9cb1a3
>---------------------------------------------------------------
commit 3262837c2d7acf5ff870a2d3463a5e08bb9cb1a3
Author: Michael Opdenacker <michael.opdenacker at bootlin.com>
Date: Fri Oct 14 10:02:13 2022 +0200
sysdev-kernel-cross-compiling-stm32mp1.tex: don't use ext2load
... as we're loading from an ext4 filesystem.
Working with U-Boot's ext2/ext4 implementation, but confusing.
Using the generic "load" command instead; good to show it.
Signed-off-by: Michael Opdenacker <michael.opdenacker at bootlin.com>
>---------------------------------------------------------------
3262837c2d7acf5ff870a2d3463a5e08bb9cb1a3
common/sysdev-kernel-cross-compiling-stm32mp1.tex | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/common/sysdev-kernel-cross-compiling-stm32mp1.tex b/common/sysdev-kernel-cross-compiling-stm32mp1.tex
index 17a41150..0f8a825b 100644
--- a/common/sysdev-kernel-cross-compiling-stm32mp1.tex
+++ b/common/sysdev-kernel-cross-compiling-stm32mp1.tex
@@ -17,8 +17,8 @@ Insert the SD card back in the board and reset it. You should now be
able to load the DTB and kernel image from the SD card and boot with:
\begin{ubootinput}
-=> ext2load mmc 0:4 0xc0000000 zImage
-=> ext2load mmc 0:4 0xc4000000 stm32mp157a-dk1.dtb
+=> load mmc 0:4 0xc0000000 zImage
+=> load mmc 0:4 0xc4000000 stm32mp157a-dk1.dtb
=> bootz 0xc0000000 - 0xc4000000
\end{ubootinput}
More information about the training-materials-updates
mailing list